Quick view Manhole Steps Manhole steps are typically placed on the inside ring of a manhole. One type requires concrete encasement while the other version is a bolt-on type. Both provide the same quality and use. These are for round manhole openings. Flat...
Quick view Corner Rack Support These supports are used to mount cable racks at corner locations where minimum cable bend radii is desired. This bracket is sometimes referred to as a "B" bracket. 1/4" x 1 1/2" low carbon steel Hot Dip Galvanized per ASTM A123 Bolt holes for...
Quick view Cable Rack Support Supports are used to mount cable racks away from walls due to pipes, cables and water seepage. This bracket is sometimes referred to as a "S" bracket. 1/2" x 1" hot roll steel Hot Dip Galvanized per ASTM A123
Quick view Cable Rack Hooks Hooks fit in cable racks. The cable rests on these hooks. Formed from 3/16" steel plate Hot dip galvanized Smooth top surface to protect cables from damage Search on "Cable Racks"
Quick view Manhole Cable Racks Designed to support cable runs in manholes and vaults. Constructed of 1 1/2" x 9/16" x 3/16" galvanized steel channel. T-slots spaced at 1 1/2" intervals. 8, 14 and 18 hole racks have interlock mounting slots at each end so two or more racks may...
Quick view Pulling In Iron Pulling in Irons provide an attachment point for pulling-in blocks when installing or removing cables. They are placed opposite conduit entrances typically in manholes. Features Steel size, 7/8" diameter Hot Dip Galvanized per ASTM A123 Cold...